If your Jeep Compass remote start isn’t working, don’t worry — you’re not alone. There are several common reasons this might happen, from a dead fob battery to safety features that prevent it from starting.
If your Jeep Compass remote start isn’t working, check for common issues like a dead key fob battery, low fuel levels, or an active check engine light. Ensure the doors are locked and follow the correct remote start procedure.
This guide will walk you through the most common causes and easy fixes for getting your Jeep Compass remote start-up running again. Whether it’s a small error or a system glitch, we’ll help you get back on the road quickly and safely with your Jeep Compass remote start working perfectly.
10 Common Remote Start Issues
1. The Remote Isn’t Being Used Properly
If your remote start doesn’t work, you might not use it correctly. Some remotes require a long press or double press. To use the remote properly, always refer to your car’s manual.
2. Check Your Fob Battery
The battery may be low if your key fob buttons feel weak or don’t respond. A simple battery replacement can often fix the issue and get your remote working again. Try replacing it with a new 2032 battery.
3. The Vehicle Is Not In Park
Your remote start won’t work if your car isn’t in park. Remove yourself from the park before attempting to start your vehicle remotely. It’s a built-in safety feature to keep your car secure.
Also Read: How Long Does Remote Start Stay On Jeep – Find Out Here!
4. Your Key Fob Is In The Car
If the key fob is still inside the car, the remote start will not function. The system requires the fob to be outside the vehicle to prevent accidental starts. Remove the fob from the car and try again.
5. Too Many Remote Start Attempts
The system might lock you out if you’ve tried remote starting your car multiple times quickly. To fix this, insert the key in the ignition, turn it on, and then off. Now, try the remote start again.
6. Check The Hood
Check the hood if your remote start isn’t working:
- Ensure the hood is securely latched.
- A safety switch prevents the engine from starting if the hood is open.
- Double-check that the hood is closed correctly before beginning the remote again.
7. Hazard Lights Are On
The remote start feature won’t work if your hazard lights are on. Turn off the hazards and try again. This simple step can quickly fix your remote start issue.
Must Read: How To Reset Jeep Check Engine Light – Full Guide 2024!
8. Coolant And Oil Pressure
If the coolant or oil levels are low, the remote start will not work for safety reasons. Check your oil pressure and coolant levels, and add fluid if necessary. This should restore the remote start function.
9. Your Remote Starter Is In Valet Mode
If your remote start isn’t working, it might be in valet mode. This mode turns off remote start for security. Check your manual to turn off valet mode, and your remote start will work again.
10. The Remote Starter Switch Is Off
Some remote starters have a switch that turns the system off. If the switch is in the off position, your remote start will not work. Check the switch under the dashboard and flip it back to activate it.
2018 Jeep Compass Remote Start Not Working
If your 2018 Jeep Compass remote start doesn’t work, it might be due to a software glitch. Try resetting the system or checking for updates at your dealership. This should restore the remote start feature.
2017 Jeep Compass Remote Start Not Working
The issue with the 2017 Jeep Compass could be a faulty fob battery or the system accidentally being disabled in the settings. Check the fob and your car’s settings to get the remote to start working again.
2016 Jeep Compass Remote Start Not Working
In the 2016 Jeep Compass, check the hood latch or safety switch. A malfunctioning switch can prevent the remote start from activating. Ensure the hood is closed tightly to resolve this issue.
2012 Jeep Compass Remote Start Not Working
For the 2012 Jeep Compass, the problem could be a broken relay or a wiring issue. If basic troubleshooting doesn’t help, you may need a professional to fix any electrical issues with the remote start.
2013 Jeep Compass Remote Start Not Working
The 2013 Jeep Compass remote start may fail due to a bad antenna or a weak signal. If replacing the fob battery doesn’t fix the issue, the antenna might need to be replaced to get the remote start back up and running.
Jeep Grand Cherokee Remote Start Disabled Start Vehicle To Reset
If your Jeep Grand Cherokee remote start is disabled, follow these steps:
- Start the vehicle manually by turning on the ignition.
- Let the car run for a few minutes.
- After a few minutes, try using the remote to start again.
This simple reset should reactivate the remote start function.
Read More: Can A Jeep Grand Cherokee Be Flat Towed – A Complete Guide!
Jeep Remote Start Disabled Start Vehicle To Reset
If your Jeep remote start is disabled, it’s likely due to a safety feature. To reset it, start the car manually and let it run for a few minutes. Then, try the remote start again to enable it.
Jeep Remote Start Not Working Check Engine Light
If the check engine light is on, your Jeep’s remote start is disabled for safety. Once the issue causing the light is fixed, the remote start feature will work again. Visit a mechanic to clear the check engine light.
FAQs
1. Why Is My Jeep Auto Start Not Working?
Your Jeep auto start might not work due to a dead fob battery, a safety feature, or incorrect settings.
2. How Do I Get My Jeep Remote Start To Work?
To get your Jeep remote to start working, check the key fob, ensure the car is in park, and check for safety issues.
3. What Is The Problem With Jeep Compass Start?
The Jeep Compass start could fail due to a faulty key fob, low battery, or a safety switch.
4. Why Is My Auto Start Stop Not Working?
Your auto start-stop may not work due to battery problems, system settings, or a malfunctioning component.
5. How Do I Reset My Auto Start Remote Starter?
To reset your auto-start remote starter, start the car manually for a few minutes and try again.
6. How To Remote Start A Jeep Compass?
To remote start your Jeep Compass, press the lock button on the fob, then hold the remote start button.
7. Why Is My Remote Key Not Starting My Car?
If your remote key doesn’t start your car, check whether the battery is dead or if the car’s security settings are blocking it.
8. How Can I Get My Remote Start To Work?
Ensure the key fob’s battery is charged, the car is in the park, and there are no safety issues.
9. How Do I Reprogram My Remote Start?
To reprogram your remote start, consult your owner’s manual or visit a professional to ensure it’s set up correctly.
10. How Do I Get My Auto Start Remote Starter Out Of Valet Mode?
To disable your auto-start remote starter from valet mode, refer to your manual and follow the steps.
Conclusion
In conclusion, simple troubleshooting can quickly fix several common issues if your Jeep Compass remote start isn’t working. Check your key fob, ensure your car is in the park, and address safety concerns like low fluid levels or an active check engine light. You can get your remote start back up and running quickly with the proper steps.
0 Comments